IMPRESSION DE FILM POUR FENÊTRE

To properly apply a window film, follow these steps:1. **Gather Materials**: - Window film - Spray bottle with soapy water (a few drops of dish soap in water) - Squeegee or credit card - Utility knife - Measuring tape - Lint-free cloth or paper towels2. **Clean the Window**: - Thoroughly clean the window surface using the soapy water and a lint-free cloth. - Remove all dust, dirt, and grease. Any debris can cause bubbles or prevent the film from adhering properly.3. **Measure and Cut the Film**: - Measure the window dimensions. - Cut the film slightly larger than the window to allow for trimming.4. **Wet the Window**: - Spray the window generously with the soapy water. This allows you to reposition the film and helps prevent bubbles.5. **Apply the Film**: - Peel the backing off the film carefully. - As you peel, spray the adhesive side of the film with soapy water. - Place the film on the wet window, adhesive side against the glass.6. **Position and Smooth the Film**: - Slide the film into position. - Use a squeegee or credit card to smooth out the film, starting from the center and moving outward to remove air bubbles and excess water.7. **Trim the Edges**: - Use a utility knife to carefully trim the excess film along the window edges.8. **Final Squeegee**: - Go over the film again with the squeegee to remove any remaining water or bubbles.9. **Let It Cure**: - Allow the film to dry and cure for a few days. Avoid touching or cleaning it during this time.By following these steps, you can achieve a smooth, professional-looking window film application.